Nokia APAC NOL
APAC TECHNICAL SUPPORT Create Date Wilchua 17 July 2007 ASB026
MULTI PROTOCOL PHOENIX SERVICE SOFTWARE
2007.20.9.28808

IMPORTANT
If you have Phoenix version 2007.4.6.170 or older you must uninstall it before installing this release. If you are installing this version of Phoenix on a new Imaged PC and you are using a FLS-4S or FLS-5 during the install then install the FLS-X drivers first. In order to Use FPS-11, you may need to install a separate package, which can be found in NOL.
This installation package contains following components:
- Connectivity Cable Driver v 6.83.9.0
- Flash Update 07.19.023, FPS-8 and FPS-10
- FLS-x Drivers v 2.09.10
- DK2 Dongle Driver v 7.00.0.0
Recommended PC HW Requirements:
- Computer Processor: Pentium 700 MHz or higher
- RAM 256 MB
- Needed disk space 100-200 MB
Supported Operating Systems:
- Windows 2000 Service Pack 4 or higher
- Windows XP Service Pack 1 or higher
During installation a DESKey software protection dongle, FLS-4s or FLS-5 prommer must be attached. There are two types of dongle - the parallel port connection and USB connection. When installing Phoenix into Win 2000 or XP you must have admin rights locally. For using the Phoenix in Win 2000 or XP, user must have power user rights.
After installing Phoenix Service Software version, please install the latest product specific data packages or SW bundles.

Changes in version 2007.20.9.28808 for GSM/WCDMA phones
New features & error corrections:
- Fixed restore settings after flashing per TSS00047750 error
- New rf_losses.ini ver.31 added per TSS00047833 change request
- Installation errors are fixed.
- Fixed the installation bugs.
- New product added (6110 RM-186 , 5310 RM-303 and 5310 (US) RM-304)
Known Errors
- Auto- tune for BB-5 not support for Willtek 4403 Tester.
- Some BB-5 phones (N-73) may not be able to flash when using FLS-5 and FBUS connection, if that’s the case use a USB connection.
- FLS-5 is unable to rebuild IME/ESN and certificates.

Changes in version 2007.20.9.28808 for CDMA phones
New features & error corrections:
- Update your FPS-8 or FPS-10’s firmware.
- Added FLS-5 support for the following models: 3155i, 6235, 6265i, 6256i, 6165, 2855i, 2865i, 2355, and 2255.
- 212X, 601X can be flashed with FLS-5, a flash adaptor must be used.
- Preferred connection to FPS-10 is using the LAN port.
- The preferred connection to FLS-4S is using the USB port.
Known Errors
- ESN rebuild for CDMA phones not supported with FPS-8 in this release.
- FLS-5 is not yet supported for all CDMA phones.
- FPS-11 has limited success with this Phoenix version.
- FPS-11 should be used to revive “dead” Phones.
- Phoenix does not restore the Theme/Background for 3155i, 3155, 3152, 6155, 6155i, and 6152 after Easy Flash. See ASB_RM-41_011.pdf (NOL > Support Library > APAC – Phones > 3155 > General Bulletin) or ASB_RM-59_007.pdf (NOL > Support Library > APAC – Phones > 6155 > General Bulletin).
General information
- FLS-4 and FPS-8 will not flash BB-5 phones except for RM-1 (6630).
- First time installing Phoenix may take a longer time.
- Auto creation of phone data XML-file is an alternative of the fault-log module, and the path for saving the XML files can be modified with the new UI under tools>Options>Phone Info XML files setting menu.
- Rebuilding IMEI/ESN, SIM lock requires Smart card, SX-4 with rebuild access rights enabled. Please send your SX-4’s serial number to your regional security officer if you need these rights.
- Rebuilding ESN/IMEI with FPS-8 now requires and SX-4 card to be used. An external smart card reader is needed when using the FPS-8.
- Auto-tuning requires a user registered and activated SX-4 card.
- Changing product codes and restoring certificates in BB-5 products may require the SX-4 card to be reregistered with your security officer. BB5 products cannot generally be flashed using the FPS-8.

Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved. OpenSSL license text can be found from http://www.openssl.org/source/license.html.

Ok guys, please inform us the bugs in comments. We open for the comments now, just for this bugs. Komentar akan di hold untuk aktivasi, masukkan nama user dan email yang benar agar tercatat diserver. Di lain waktu gunakan nama dan email yang sama.

Komentar Disini